November 12, 2018

6 tips on how to pass your next roadside inspection

6 tips on how to pass your next roadside inspection

Roadside inspections may make drivers and fleet managers a little nervous. An inspection may seem like a nuisance, but it’s important as it ensures safety for the driver and other motorists on the road.

Roadside inspections are on-the-spot safety checks that may take some drivers by surprise if they are not ready. However, planning ahead and careful preparation can help drivers pass these inspections.

Here are 6 tips for drivers that would help them pass their next roadside inspection with flying colors.

1. Learn how to be inspection-ready

This is where fleet managers can also lend a hand. The Commercial Vehicle Safety Alliance (CVSA) has written a hefty 76-page manual on this topic.

Fleet managers can break that down into manageable chunks and share the information with their drivers. They can also enroll in one of the classes CVSA offers on driver requirements, vehicle requirements, or both.

Eight levels of inspections exist, but being fully ready for Level 1, the North American Standard Inspection, should prepare you for most of the other levels of inspection.

The Level-1 roadside inspection is a 37-step procedure during which the CVSA safety inspector thoroughly examines the CMV and the driver.

For the driver, the inspection includes an examination of the driver’s Medical Examiner’s Certificate, driver’s license, hours-of-service record, license, etc. The vehicle examination includes brake systems, exhaust systems, fuel systems, lighting devices, cargo securement, and more.

Complete details of the Level 1 roadside inspection can be found here.

2. Do a thorough pre-trip inspection

A proper pre-trip inspection can help identify important issues. It can save the driver and the company downtime, expensive repairs, and violations during roadside inspections.

From cargo securement to air leaks, everything must be thoroughly examined.

Also, don’t forget to clean the truck’s windshield. A dirty windshield can target you for a roadside inspection, said Kentucky State Police Sergeant, Jason Morris. Besides being a safety issue, a dirty windshield can be a sign of other problems.

Morris also recommends walking around your truck. Take your time on your pre-inspection and make sure the truck is safe to drive.

Brakes, lights, or tires are often reasons of a failed inspection. Check the tire pressure as well as tread depth. Look for exhaust leaks, working turn signals, headlights, tail and brake lights, and a secure load during pre-trip inspections.

3. Follow the hours of service (HOS) rules

Non-compliance with hours-of-service rules may lead to citations and violations during roadside inspections. During the CVSA International Roadcheck 2018, hours-of-service violations represented 43.7% of all driver out-of-service conditions.

Although electronic logging devices (ELDs) now record hours-of-service information automatically, drivers still need to understand how hours-of-service rules work.

Drivers should also learn about the specific hours-of-service rules that apply to them, hours-of-service exemptions that they qualify for, and rules about personal conveyance and yard moves. The summary of hours-of-service rules on the FMCSA website and this in-depth FMCSA discussion of the HOS rules are both excellent resources.

4. Stay ELD compliant

The ELD mandate is in full effect, and non-exempt drivers require FMCSA-compliance electronic logging devices to stay compliant.

Non-compliance with the ELD regulations and the improper use of the ELD are now essential elements of any roadside inspection. 22 ELD violations now affect a carrier’s SMS score, and ELD violations can place drivers out-of-service.

Therefore, complying with the ELD mandate and understanding ELD violations and regulations are important for successfully passing roadside inspections.

5. Obey all traffic rules

Drivers can avoid roadside inspections by obeying all traffic rules and driving safely. If you are violating traffic laws, you may stand out and be pulled over for a roadside inspection.

Here are a few tips to follow:

  • Stay away from cell phones
  • Wear your seatbelt correctly with the shoulder strap crossing your chest and the lap belt secured
  • Obey traffic signals and road signs
  • Avoid speeding and harsh driving

6. Offer your drivers incentives

Fleet managers can also offer incentives to drivers for successful roadside inspections in the form of monetary and non-monetary rewards.

By offering a reward that drivers want to work towards, you can encourage more thorough pre-trip inspections, careful planning, and more commitment towards successfully passing roadside inspections.

Conclusion

During the CVSA International Roadcheck 2018, which took place from June 5 to June 7 this year, a total 67,502 vehicles were inspected. Out of those, inspectors identified 11,897 vehicles and 2,664 drivers with out-of-service conditions.

Follow the tips mentioned in this article to pass roadside inspections successfully. Focus on pre-trip inspections, understand hours-of-service rules and ELD regulations, and drive legally to improve your chances.

You can also use the KeepTruckin ELD and the KeepTruckin Electronic Logbook App to accurately record your hours-of-service information. If you have any questions, call 855-434-ELOG or email at support@keeptruckin.com.

This article was written by: Heather Larson

(Visited 3,427 times, 638 visits today)
Request Demo